PDA

View Full Version : Audio / Video Inputs to PDR100 - clarication please!

steevg
11-08-2008, 10:17 PM
Hi Guys,

Just working on a custom loom for my PDR100, I have some information which shows the following information (see diagram below).

But I'm a little confused, Is this diagram the information for the A/V output connector, AND the Mic/Audio Input connectors in ONE diagram?

My Question is: Can I use (standard) stereo jacks for the Audio I/P's and a mono jack for the A/V O/P to my TFT monitor?

Thanks,
Steve
Jordantii
11-09-2008, 09:20 AM
It is just the AV connector.
steevg
11-10-2008, 10:38 AM
Jordantii,

Thanks,. . . . but:-

My Question is: Can I use (standard) stereo jacks for the Audio I/P's and a mono jack for the A/V O/P to my TFT monitor?

Regards,
Steve
RandallNoll
11-10-2008, 10:58 AM
Steve,

Yes. The diagram shows the AV ouput in the Standard A/V line, and the Mic/Line In pin format on the Standard Audio line. The Mics we have here look the same but there is no break between #3 and #4, it's all #3.

I have successfully used the mono AV output cord from my point and shoot to show video from the PDR.

Hope this helps!
steevg
11-11-2008, 03:11 AM
Randall,

Yes it certainly does help.
Thanks for the clarification on this issue.
Back to work with the loom!

Cheers,
Steve