MoTeC

[admin]

MoTeC info below.

[Tom W]

I can report that the MoTeC VSM (with i2Pro and a SDL) works just fine with the PDR100 and SS1000.

[chris]

The PDR100 can be integrated into a Motec dash; either ADL, ADL2, SDL or ACL. Through this there are a number of features available such as:
1) the motec can turn on and off the PDR.
2) the motec can start and stop recording.
3) the motec can send a video sync signal into the audio (VSM).
4) the motec can send live data to be recorded on the video.

Item #3 require the Video Sync Module, about $127.
Item #4 requires a PDR purchased from Motec.

Motec has built a nice adapter harness that makes all of the connections on the back of a PDR100 into a standard DTM style connector. These are available for $163.

The analysis software, i2, allows for synced video playback of multiple cameras. Overlay laps with video can be played back in distance mode!

For post processing, the latest "i2" software integrates with TrackVision so you can export nice fancy gauges and data onto the video.

Contact Motec for more information.

[Juan Lopez]

Well I use MOTEC in my car and just bought a ChaseCam setup (but not from MOTEC). I'll check to see how to interface the units.

[Kevin]

You only need a ChaseCam from Motec unless you are overlaying the data onto the video itself. If you plan on using the VSM, which I like the best, you need a ChaseCam that has source mixing. That is how the VSM works so it is very important to have source mixing. But is works great with i2. But the VSM does not work with ADL because it seems they don't want to update the software for ADL's to make the VSM's work with it. So if you have a ADL then forget about the VSM. I have done it on ADL2 and SDL no problem though.

Kevin
WorldSpeed.com