Pdr100-h

[admin]

The differences are that the PDR-100H does not use the camera MiniDIN connector, but instead uses a Lemo Connector that carries video in and out, and 12VDC and Ground.
<o></o>
The power terminal block is removed. Power is supplied via the internal batteries, DC Jack, or using the Lemo connector.
<o></o>
There are additional BNC connectors for video in and out.
<o></o>
If you are using the LEMO connector, the BNCs and the DC jack are not needed and are only provided as alternates.
<!---->
LEMO connector information<o>:</o>
5 pin LEMO 0B size
Part number for the mating connector-
5 pin LEMO 0B size. Contact factory for more information or suggested mating connectors.


Added-
BNC Video In
BNC Video Out

Lemo Connector, 5 pin
[I]FROM FUNCTION (REF) <o></o>
1 POWER GROUND
2 +12V POWER IN
3 VIDEO INPUT
4 VIDEO GROUND
5 VIDEO OUTPUT

[Mark]

Not that I'm looking to get another PDR yet, but one comment:

This might be in the previous incarnation of the forum, but it might be helpful to indicate where we could find more information about the various different flavors of the PDR100.

I can't find any mention of PDR variants on the main chasecam website- especially since it too seems to have been revamped.